Products

Medical Pump

Sales points

1. Auto-recognize the syringe size: 10, 20, 30, 50ml.

2. KVO (Keep Vein Open) function. After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.1ml/h.

3. Bolus (Quick Infuse) function.

4. Purge (Evacuate Bubble) function.

5. RS232 port, able to connect with the computer.

6. The bright & large LCD screen, easy look .

7. Wide flow rate range from 0.1-1600ml/h .

8. The battery can be used continuously for 6 hours after full charged

Features

Dimensions (mm)	271(L)×167(W)×287(H)
Weight	3.6kg
Power supply	AC 100V~AC 242V,50/60HZ(±1 HZ)
Built-in battery	DC 12V 2800mAh
Battery Model	JBT Ni-MH, rechargeable
Battery Continuous Use Time	At least 6hrs for single channel(Fully charged new battery, under 5ml/h running)

Power consumption	≤42 VA
Infusion Flow Selection	0.1ml/h~1600ml/h, original value is 0.1ml/h
Bolus rate	Syringe 50ml:1600ml/h Syringe 30ml:900 ml/h Syringe 20ml:600 ml/h Syringe 10ml:400 ml/h
Infusion Range	0.1ml~9999.9ml, original value is 0.1ml
Flow Rate Precision	±3%
Occlusion Pressure	High:110kPa±20kPa (825mmHg±150 mmHg) Middle:80kPa±30kPa (600mmHg±225mmHg) Low:60kPa±20kPa (450mmHg±150 mmHg)
The biggest output pressure	< 975mmHg(130kPa)
Use Environment	Temperature: 5℃~43℃ Relative Humidity:≤90%RH (Under without condensation status) Atmospheric Pressure:860hPa~1060hPa
Storage Environment	Temperature:-40℃~+55℃ Relative Humidity:≤90%RH (Under without condensation status) Atmospheric Pressure:860hPa~1060hPa
Waterproof Level	IPX4
Electric Shock Protection	Class I, Type CF
Alarm	occlusion, nearly finish, finish, standby (no operation) low battery, battery exhausted etc.
Function	transfusion amount display, flow rate display, infused volume display

Special Function

KVO (Keep Vein Open)	After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.1ml/h.
Power Supply Switching Function	When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working.
Repeat Alarm Function	If the alarm real reason is not be resolved within 2 minutes after press “SILENCE” button, it will give alarm again to remind to resolve the problem.

KVO (Keep Vein Open)

After finish setting infusion amount, for prevent to form

thrombus, keep to infusion at the lowest rate 0.1ml/h.

Power Supply Switching

Function

When AC power is disconnected, automatically switch into

battery power supply and give indication. When the AC power

is connected, automatically switch into AC power working.

Repeat Alarm Function

If the alarm real reason is not be resolved within 2 minutes

after press “SILENCE” button, it will give alarm again to remind

to resolve the

problem.

Data Memory Function	Able to save the latest setting alarm volume level, brand, occlusion pressure level for use next time. Able to save for five years.
Battery Protection Alarm	For protect battery and safety infusion, the battery power will be displayed as different levels in sound and light from nearly finish to exhausted.
Move alarm	When try to move or take the syringe away, it will give alarm.

Data Memory Function

Able to save the latest setting alarm volume level, brand,

occlusion pressure level for use next time. Able to save for

five years.

Battery Protection Alarm

For protect battery and safety infusion, the battery power

will be displayed as different levels in sound and light from

nearly finish to exhausted.

Move alarm

When try to move or take the syringe away, it will give alarm.

Sun-520 Syringe Pump's Advantages

1. Our syringe pump could use all brands through calibration (default setting is Terumo).
2. Auto-recognize the syringe size: 10, 20, 30, 50ml.
3. Wide flow rate range from 0.1-1600ml/h.
4. Two LCD screens can be worked separately or meanwhile.
5. Available for adjust alarm volume (3 levels), occlusion pressure (3 levels).
6. Power Switching Function:When AC power is disconnected, automatically switch into battery power supply and give indication. When the AC power is connected, automatically switch into AC power working.
7. Repeat Alarm Function: If the alarm real reason is not be resolved within 1 minutes after press “SILENCE” button, it will give alarm again to remind to resolve the problem.
8. Battery Protection Alarm: For protect battery and safety infusion, the battery power will be displayed as different levels in sound and light from nearly finish to exhausted.
9. Double confirmation function when flow rate≥300ml/h, make safer and avoid misoperation.
10. The data can be cleared, make safer.
11. Lock the control panel during infusion, make safer.
12 For avoid misoperation, press “POWER” for 3 seconds to close the pump.
13. Real display the battery power in panel.
14. Different alarm light display in red and yellow color base different priority level.
15. RS232 port, able to connect with the computer.
16. KVO (Keep Vein Open) function. After finish setting infusion amount, for prevent to form thrombus, keep to infusion at the lowest rate 0.1ml/h.
17. Bolus (Quick Infuse) function.
18. Purge (Evacuate Bubble) function.
19. The bright & large LCD screen, easy look
20 The battery can be used continuously for 6 hours after full charged.
21. The chip in syringe pump is be processed by ourselves on SMT machine production line instead of by manual work, as weld every point by hand.
22. CPU control, stable function, high reliability.

1. Our syringe pump could use all brands through calibration (default setting is Terumo).

2. Auto-recognize the syringe size: 10, 20, 30, 50ml.

3. Wide flow rate range from 0.1-1600ml/h.

4. Two LCD screens can be worked separately or meanwhile.

5. Available for adjust alarm volume (3 levels), occlusion pressure (3 levels).

6. Power Switching Function:When AC power is disconnected, automatically switch

into battery power supply and give indication. When the AC power is connected,

automatically switch into AC power working.

7. Repeat Alarm Function: If the alarm real reason is not be resolved within 1 minutes

after press “SILENCE” button, it will give alarm again to remind to resolve the problem.

8. Battery Protection Alarm: For protect battery and safety infusion, the battery power

will be displayed as different levels in sound and light from nearly finish to exhausted.

9. Double confirmation function when flow rate≥300ml/h, make safer and avoid

misoperation.

10. The data can be cleared, make safer.

11. Lock the control panel during infusion, make safer.

12 For avoid misoperation, press “POWER” for 3 seconds to close the pump.

13. Real display the battery power in panel.

14. Different alarm light display in red and yellow color base different priority level.

15. RS232 port, able to connect with the computer.

16. KVO (Keep Vein Open) function. After finish setting infusion amount, for prevent to form

thrombus, keep to infusion at the lowest rate 0.1ml/h.

17. Bolus (Quick Infuse) function.

18. Purge (Evacuate Bubble) function.

19. The bright & large LCD screen, easy look

20 The battery can be used continuously for 6 hours after full charged.

21. The chip in syringe pump is be processed by ourselves on SMT machine production line instead

of by manual work, as weld every point by hand.

22. CPU control, stable function, high reliability.

Back Up