Specifications
|
Large LCD display, with backlight, suitable for working in various ambient light conditions. |
|
Disposable IV set of any brand is suitable for this pump |
|
Three working modes: Rate/Volume/Time mode |
|
Purge, KVO function |
|
Heating function is optional, suitable for infusing in winter or there is requirement for the medication temperature. |
|
Remote Controller makes operating more convenient. |
|
Central monitoring system is optional, the infusing status of each pump is displayed in real time at the central station through wireless transmission. |
|
Simple and convenient in operating, intuitive presence of working status. |
|
Audible and Visible alarms |
|
Alarm: Infusion Complete, Empty, Faulty Signal, Misoperation, Occlusion, Door Open, Air Bubble, Low Battery, Setting Error, AC power off, Idle. |
|
Size: 188 mm(L)*198 mm(W)*228 mm(H) |
|
Net Weight: 2.2kg |
Technical Specifications
|
Pump Type |
Drip type infusion pump |
|
Pumping Way |
Peristalic fingers |
|
Adjustable Drop Rate Range |
1~400 drops/min (step: 1 drop/min) |
|
Adjustable Volume Rate Range |
1~1200 ml/h (when 1~99.9 ml/h, step: 0.1 ml/h; greater than 99.9 ml/h, step: 1 ml/h) |
|
Flow Precision |
Within 3% more or less(using the IV set appointed by the manufacturer or calibrated high quality IV set) |
|
Mechanical precision |
within 2% more or less |
|
Purge Rate |
800 ml/h |
|
KVO Rate |
1 ml/h (1~300 ml/h) 3 ml/h (greater than 300 ml/h) |
|
Infusion Volume Range |
1 ml~9999.9 ml (step: 0.1 ml) |
|
Maximum Accumulated Volume |
9999.9 ml (step: 0.1 ml)
|
|
Time Range |
1 min~9999 min (step: 1 min) |
|
Occlusion Alarm Threshold |
High: 800 mmHg+-200 mmHg (106.7kPa+-26.7kPa) Medium: 500 mmHg+-100 mmHg (66.7kPa+-13.3kPa) Low: 300 mmHg+-100 mmHg (40.7kPa+-13.3kPa) |
|
Alarm |
Infusion Complete, Empty, Faulty Signal, Misoperation, Occlusion, Door Open, Air Bubble, Low Battery, Setting Error, AC power off, Idle. |
|
Air Bubble Detector Method |
ultrasonic wave, sensitivity: more than or equal 25 μL |
|
Fuse |
F1AL/250V ("F" indicate fast,"L" indicate low breaking capacity), 2 pcs (installed inside pump). |
|
Power Supply |
AC 85~265V, 50/60Hz; |
|
Internal Battery |
11.1V rechargeable li-ion battery. Capacity:more than or equal 2000mAh; the pump can work more than 4 hours at the flow rate of 25 ml/h after charging for 8 hours (Medium rate specified by GB 9706.27-2005). |
|
Power |
less than or equal 40VA |
|
Size |
188 mm(L)*198 mm(W)*228 mm(H) |
|
Weight |
2.2KG |
|
Environment Requirements |
Transport Ambient Temperature: -30°C~+55°C Relative Humidity: 20%~95% (non-condensing) Atmosphere Pressure: 70kPa~106kPa Storage Ambient Temperature: -30°C~+55°C Relative Humidity: 20%~95% Atmosphere Pressure: 70kPa~106kPa Operation Ambient Temperature: +5~+40°C Relative Humidity: 20%~90% Atmosphere Pressure: 86kPa~106kPas |
|
Calibration function |
disposable IV set of any brand is suitable for this pump |
|
Three working modes |
Rate/Volume/Time mode |
|
Alarm |
Infusion Complete, Empty, Faulty Signal, Misoperation, Occlusion, Door Open, Air Bubble, Low Battery, Setting Error, AC power off, Idle. |
|
infusion monitoring system (Optional), the status of each pump is displayed in real time at the central station through wireless transmission. |
|
|
4.3 inch color LCD display, with backlight, suitable for working in various ambient light conditions. |
|
|
Display time, battery, infusing status, mode, rate, target volume, accumulated volume, target volume, sound volume, pressure, department, bed No., I/V set, temperature of medication |
|
